6XV1 83O-3EH1O產品細節
6XV1 83O-3EH1O產品細節
產品價格：￥電議（人民幣）
  • 規格：6XV1 830-3EH10
  • 發貨地：上海
  • 品牌：
  • 最小起訂量：1米
    • 誠信商家
    會員級別：鉆石會員
    認證類型：企業認證
    企業證件：通過認證

    商鋪名稱：上海斌勤電氣技術有限公司

    聯系人：康奎（先生）

    聯系手機：

    固定電話：

    企業郵箱：192061030@qq.com

    聯系地址：上海市松江區三新北路1800弄（松江電子商務園區）

    郵編：201501

    聯系我時，請說是在線纜網上看到的，謝謝！

    商品詳情

      6XV1 83O-3EH1O產品細節

      PROFIBUS FC 拖曳電纜， PROFIBUS 拖曳電纜，最多 加速度 4m/QS min. 3 每分鐘百萬次彎曲循環 2 芯彎曲半徑約 120mm 有屏蔽，按米銷售 供貨單位最大 1000m 最小訂貨量 20m
      上海斌勤電氣技術有限公司（西門子合作商）
      發布人：康奎 （銷售經理）
      地   址：上海市松江區三新北路1800弄（松江電子商務園區）
      歡迎咨詢  詢價   增值稅發票 實拍圖提供
      支持上門提貨 送貨
      零售  批發 外貿
      免費提供西門子軟件說明書等
      相關技術

      概述

      SIDOOR ATD410W machine tool door drive

      The SIDOOR ATD410W machine tool door drive can be used to operate horizontal sliding doors. The drive system has been specifically designed for use in a very wide range of machine tools. The communication-capable ATD410W controller offers complete flexibility for integration with a machine tool via the USS protocol (universal serial interface protocol).

      • For dynamic door weights up to 600 kg
      • USS module design: USS communications interface for connection to ET 200-type higher-level controllers, SIMATIC S7?1200, SIMATIC S7?1500 and SIMATIC S7?300 via USS interface
      • 5 freely parameterizable digital inputs for signal acquisition, of which one input is optionally parameterizable for:
        • Connection of a light barrier as type 2 ESPE (electro-sensitive protective equipment) according to EN 61496-1
        • Connection of a pressure-sensitive edge according to ISO 13856-22, relay contacts for additional position signals
      • Automatic determination of the door weight and friction during the learn run
      • Operating temperature -20 to +50 °C
      • Flexible motor management, i.e. automatic recognition of the geared motor
      • Assisted drive (motor-assisted movement of the door)
      • Impulse stop (door stopped automatically by applying light force)
      • Impulse drive (automatic door movement by applying light force)
      • Opening width 0.3 to 5 m
      • Auxiliary voltage output 24 V DC ± 15 %; 0.4 A (short-circuit-proof)
      • Output stage for the motor control short-circuit-proof
      • Displays the current operating states on a 7-segment display directly on the controller or with the Software Kit or Service Tool
      • All door parameters can be assigned via the PROFIdrive profile with the function block provided. For details, see the System Manual "SIDOOR AT40, ATD400V, ATD400K, ATD400W, ATD410W, ATD400S, ATE250S", http://support.automation.siemens.com/WW/view/en/58531074

      優勢

      • 1-button operation for the entire commissioning process
      • Optimum and stable drive characteristics
      • Reduced service requirements and costs
      • SIDOOR User Software (part of the Software Kit, not included in the scope of supply, see "Additional units") enables user-friendly operation and detailed diagnostics.
      • Integrated terminal module enables simple setup and diagnostics via an event and statistics memory.
      • Small footprint thanks to compact design
      • Complete parameter assignment via PROFIDrive profile in STEP7 and TIA

      應用

      The SIDOOR ATD410W machine tool door drive is an intelligent door control system that enables protective doors on machine tools to be opened and closed at adjustable speeds and accelerations.

      The maintenance-free, variable speed drive unit comprises a DC motor with non-self-locking gearing.

      Various motors are available for selection, they have to be ordered separately, see "Geared motors".

      They must be ordered separately, see "Geared motors".

      Operation of the door drive does not require limit switches. The door width and the "OPEN"/"CLOSE" positions are determined automatically.

      The current operating states are indicated by a 7?segment display directly in the SIDOOR ATD410W machine tool door drive. They can also be displayed externally using the Software Kit or Service Tool, see "Additional units". The associated function block can be used for configuration and parameter assignment purposes, see "Programming".

      Forces are transferred via a toothed belt, which passes over a deflector unit and can be fitted with two door clutch holders. The accessories are not included in the scope of supply, see "Accessories".

      This enables handling of both one-sided and centrally opening doors.

      設計

      The SIDOOR ATD410W machine tool door drive system consists of a number of components:

      Version

      Type

      See

      Controller

      SIDOOR ATD410W machine tool door drive
      (incl. terminal module and USS module)

      6FB1141?4AT10?3WE2

      		 

      The following individual components must be ordered separately:

      Power supplies

      "Power supplies"

      • Mains transformer

      6FB1112?0AT20?2TR0

      		 
      • Switch mode power supply NT40

      6FB1112?0AT20?3PS0

      		 

      Additional units
      that enable universal implementation and maintenance of the door drive system

      "Additional units"

      • Software Kit

      6FB1105?0AT01?6SW0

      		 
      • Service Tool

      6FB1105?0AT01?6ST0

      		 
      • Emergency power module

      6FB1115?0AT10?4CP0

      		 

      DC geared motors

      "Geared motors"

      • SIDOOR MDG180 geared motors (max. door weight 180 kg, degree of protection IP56)
      		   
      • SIDOOR MDG180 L (pinion left)

      6FB1103?0AT14?4MB0

      		 
      • SIDOOR MDG180 R (pinion right)

      6FB1103?0AT13?4MB0

      		 
      • SIDOOR MDG400 geared motors (max. door weight 400 kg, degree of protection IP56)
      		   
      • SIDOOR MDG400 L (pinion left)

      6FB1103?0AT14?3MC0

      		 
      • SIDOOR MDG400 R (pinion right)

      6FB1103?0AT13?3MC0

      		 
      • SIDOOR M3 geared motors (max. door weight 180 kg, degree of protection IP40)
      		   
      • SIDOOR M3 L (pinion left)

      6FB1103?0AT10?4MB0

      		 
      • SIDOOR M3 R (pinion right)

      6FB1103?0AT11?4MB0

      		 
      • SIDOOR M4 geared motors (max. door weight 400 kg, degree of protection IP40)
      		   
      • SIDOOR M4 L (pinion left)

      6FB1103?0AT10?3MC0

      		 
      • SIDOOR M4 R (pinion right)

      6FB1103?0AT11?3MC0

      		 
      • SIDOOR M5 geared motors (max. door weight 600 kg, degree of protection IP54)
      		   
      • SIDOOR M5 L (pinion left)

      6FB1103?0AT10?3MD0

      		 
      • SIDOOR M5 R (pinion right)

      6FB1103?0AT11?3MD0

      		 

      Accessories for the overall system
      See also overview diagram → "For elevators"

      "Accessories"

      • Rubber-metal anti-vibration mounts 
        for low-noise operation of the door drive system
      		   
      • for the SIDOOR MDG180 and SIDOOR M3 geared motors

      6FB1104?0AT02?0AD0

      		 
      • for SIDOOR MDG400, SIDOOR M4 and SIDOOR M5 geared motors

      6FB1104?0AT01?0AD0

      		 
      • Mounting bracket
      		   
      • for mounting the SIDOOR rubber-metal anti-vibration mount with a mounted geared motor

      6FB1104?0AT01?0AS0

      		 
      • with tensioning device for mounting the deflector unit and setting the toothed belt to the required tension

      6FB1104?0AT02?0AS0

      		 
      • DIN rail holder for mounting controllers on the DIN rail TH 35 according to IEC 60715

      6FB1144?0AT00?3AS0

      		 
      • Door clutch holder
        for attaching both ends of the toothed belt, and for connecting the respective door panel to the toothed belt
      		   
      • for toothed belt width of 12 mm

      6FB1104?0AT01?0CP0

      		 
      • for toothed belt width of 14 mm

      6FB1104?0AT02?0CP0

      		 
      • Deflector unit
        for deflecting the STS toothed belt in the same height and depth, aligned with motor drive pinion

      6FB1104?0AT03?0AS0

      		 
      • Toothed belt STS 
        as a connection between the door system and the end positions of the door
      		   
      • Toothed belt width 12 mm
        Length 4 m
        Length 45 m


      6FB1104?0AT01?0AB0
      6FB1104?0AT02?0AB0

      		 
      • Toothed belt width 14 mm
        Length 4 m
        Length 55 m


      6FB1104?0AT03?0AB0
      6FB1104?0AT04?0AB0

      		 

      Accessories for the SIDOOR ATD410W machine tool door drive only

      		 
      • CABLE-MDG hybrid connecting cables 
        for connecting the SIDOOR MDG geared motor to the SIDOOR ATD410W machine tool door drive
      		   
      • CABLE-MDG-0.5m (length 0.5 m)

      6FB1104?0AT00?0CB5

      		 
      • CABLE-MDG-1.5m (length 1.5 m)

      6FB1104?0AT01?0CB5

      		 
      • CABLE-MDG-5m (length 5 m)

      6FB1104?0AT05?0CB0

      		 
      • CABLE-MDG-7m (length 7 m)

      6FB1104?0AT07?0CB0

      		 
      • CABLE-MDG-10m (length 10 m)

      6FB1104?0AT10?0CB0

      		 
      • CABLE-MDG-15m (length 15 m)

      6FB1104?0AT15?0CB0

      		 
      • PROFIBUS FastConnect bus connector and PROFIBUS FC Standard Cable GP
      		   
      • PB FC RS 485 PLUG 180 
        bus connector for connecting the SIDOOR ATD410W machine tool door drive to the SIMATIC controller

      6GK1500?0FC10

      		 
      • PB FC Standard Cable GP 
        bus cable with a special design for quick mounting

      6XV1830-0EH10

      		 
      • Electronic module for ET 200S
        for serial data exchange via point-to-point connection

      6ES7138?4DF11?0AB0

      		 
      • Communication module CM PtP RS 422/485 BA

      6ES7540?1AB00?0AA0

      		 
      • Communication module CM 1241
        Communication module for point-to-point connection

      6ES7241?1CH32?0XB0

      		 

      組態

      During initial commissioning, please note the following:

      • For mechanical installation and configuration see "SIDOOR Door Control Systems AT40, ATD400K, ATD400S, ATD400V, ATD400W" Manual,http://support.automation.siemens.com/WW/view/en/58531074
      • Electrical configuration and commissioning:
        • Push the door into the "CLOSED" position.
        • Open the device cover
        • Plug in the motor connector
        • Connect NT40 switch mode power supply to 230 V AC mains supply
        • Press and hold the learn run button
        • Connect the NT40 switch mode power supply output to the input of the SIDOOR ATD410W machine tool door drive
        • The learn run starts automatically and the learn run button can be released.
        • On completion of the learn run, the door is in the "CLOSED" position and the 7-segment display indicates "u".
        • The door can now be moved via the "OPEN" and "CLOSE" buttons with the default profile.

      The SIDOOR ATD410W machine tool door drive is configured in STEP 7 or in the TIA Portal with the function block provided.

      編程

      The Software Kit is available as an additional unit (see "Additional units") and allows quick and easy updating of the firmware using the Siemens HCS12 Firmware Loader.

      User-friendly parameter setting and oscilloscope function is carried out via the SIDOOR User Software (part of the Software Kit).

      All door parameters of the SIDOOR ATD410W machine tool door drive can be assigned via the PROFIDrive profile with the function block provided.

      For details see "SIDOOR Door Control Systems AT40, ATD400K, ATD400S, ATD400V, ATD400W" Manual,http://support.automation.siemens.com/WW/view/en/58531074

      技術規范

      Article number

      6FB1141-4AT10-3WE2

      SIDOOR ATD410W

      General information

       

      Product brand name

      SIDOOR

      Product version

      With USS interface

      Optional product expansion

      TRANSFORMER (6FB1112-0AT20-2TR0), NT40 (6FB1112-0AT20-3PS0), DIN rail holder (6FB1144-0AT00-3AS0)

      Manufacturer's article no. of the usable motor

      6FB1103-0AT11-3MC0, 6FB1103-0AT10-4MB0, 6FB1103-0AT10-3MC0, 6FB1103-0AT11-3MC0, 6FB1103-0AT14-3MC0, 6FB1103-0AT13-4MB0, 6FB1103-0AT14-4MB0, 6FB1103-0AT14-3MC0, 6FB1103-0AT13-3MC0, 6FB1103-0AT11-3MD0, 6FB1103-0AT10-3MD0

      Manufacturer's article no. of the usable power supply unit

      6FB1112-0AT20-2TR0, 6FB1112-0AT20-3PS0, 6EP3446-8SB10-0AY0

      Installation type/mounting

       

      Installation and mounting instructions

      No direct sunlight, requirements specific to the end application must be observed. NFPA industry environment: Installation outside a control cabinet only horizontal

      Supply voltage

       

      Rated value (DC)

      36 V

      Input current

       

      I2t, min.

      30 A2·s

      Power

       

      Active power input (standby mode)

      5 W

      Digital inputs

       

      Control inputs isolated

      Yes

      Control inputs p-switching

      Yes

      Protection in case of DC supply

      Use of a circuit breaker in the supply path according to 60898-1, 8A, C-characteristic type SIEMENS: 5SY4108-7 or 5SY4108-7KK11

      Input voltage

       

      • ● per DC input, min.

      10 V; Observe polarity !

      • ● per DC input, max.

      28 V; Observe polarity !

      Input current

       

      • ● per DC input, min.

      9 mA

      • ● per DC input, max.

      27 mA

      Digital outputs

       

      short-circuit proof

      Yes

      Overload-proof

      Yes

      Remark

      Ensure correct polarity! CAUTION: Do not supply with external voltage!

      Output voltage

       

      • ● Output voltage (DC)

      24 V

      Output current

       

      • ● For output (24 V DC), max.

      400 mA

      Relay outputs

       

      Switching capacity of contacts

       

      • — at 30 V DC, min.

      0.01 A

      • — at 30 V DC, max.

      0.5 A

      Mechanical data

       

      Opening width of door, min.

      0.3 m

      Opening width of door, max.

      5 m

      Weight of door, max.

      600 kg

      Operating cycle frequency of door, max.

      180 1/h

      Counterforce, max.

      75 N

      Kinetic energy, max.

      100 J

      Interfaces

       

      Interfaces/bus type

      USS according to EIA 485, IEC 61800-7-200 Type 3

      Number of bus nodes

      32

      Isolation

       

      Overvoltage category

      2

      Degree and class of protection

       

      IP degree of protection

      IP20

      Standards, approvals, certificates

       

      Certificate of suitability according to EN 81

      No

      CE mark

      Yes

      UL approval

      No

      EAC (formerly Gost-R)

      Yes

      TüV Inspectorate approval

      Yes

      China RoHS compliance

      Yes

      Standard for EMC

      EN 61000-6-2 / EN 61000-6-4

      Standard for safety

      EN 60950-1 / EN ISO 13849-1 2008 Cat. 2 PL d

      Ambient conditions

       

      Ambient temperature during operation

       

      • ● min.

      -20 °C

      • ● max.

      50 °C

      Ambient temperature during storage/transportation

       

      • ● Storage, min.

      -40 °C

      • ● Storage, max.

      70 °C

      Air pressure acc. to IEC 60068-2-13

       

      • ● Installation altitude above sea level, max.

      2 000 m

      Relative humidity

       

      • ● No condensation, min.

      10 %

      • ● No condensation, max.

      93 %

      Dimensions

       

      Width

      320 mm

      Height

      60 mm

      Depth

      80 mm


    在線詢盤/留言
    • 0571-87774297  
    主站蜘蛛池模板： 毛片免费观看视频| 97碰公开在线观看免费视频| 成人人免费夜夜视频观看| 久久婷婷成人综合色| 欧洲熟妇色xxxx欧美老妇多毛| 亚洲精品tv久久久久久久久久| 男女抽搐动态图| 农村老熟妇乱子伦视频| 色一乱一伦一区一直爽| 国产偷自拍视频| 成人免费视频网站www| 欧美怡红院免费全部视频| 伊人影院综合网| 精品欧美日韩一区二区| 国产三级小视频| 高清毛片aaaaaaaa**| 国产日韩欧美视频| 香蕉免费一级视频在线观看 | 亚洲香蕉久久一区二区三区四区| 精品国产一区二区三区香蕉| 四虎国产精品永免费| 色妞视频一级毛片| 国产乱人视频在线播放不卡| 香蕉免费一级视频在线观看| 国产成人免费网站在线观看| 国模私拍福利一区二区| 国产精品久久久久久麻豆一区| 69av免费视频| 国产美女久久久久| 91大神精品网站在线观看| 国模无码视频一区| 999精品在线| 在线播放中文字幕| 99久久免费国产精精品| 在线播放高清国语自产拍免费| 99精品视频在线观看免费播放| 天天狠天天透天干天天怕∴| hdjapanhdsexxx| 天天在线天天综合网色| JAPANESE国产在线观看播放| 大佬的365天第三季完整视频在线观看 |