Controller

SIDOOR ATD410W machine tool door drive
(incl. terminal module and USS module)

6FB1141?4AT10?3WE2

The following individual components must be ordered separately:

Power supplies

"Power supplies"

• Mains transformer

6FB1112?0AT20?2TR0

• Switch mode power supply NT40

6FB1112?0AT20?3PS0

Additional units
that enable universal implementation and maintenance of the door drive system

"Additional units"

• Software Kit

6FB1105?0AT01?6SW0

• Service Tool

6FB1105?0AT01?6ST0

• Emergency power module

6FB1115?0AT10?4CP0

DC geared motors

"Geared motors"

• SIDOOR MDG180 geared motors (max. door weight 180 kg, degree of protection IP56)

• SIDOOR MDG180 L (pinion left)

6FB1103?0AT14?4MB0

• SIDOOR MDG180 R (pinion right)

6FB1103?0AT13?4MB0

• SIDOOR MDG400 geared motors (max. door weight 400 kg, degree of protection IP56)

• SIDOOR MDG400 L (pinion left)

6FB1103?0AT14?3MC0

• SIDOOR MDG400 R (pinion right)

6FB1103?0AT13?3MC0

• SIDOOR M3 geared motors (max. door weight 180 kg, degree of protection IP40)

• SIDOOR M3 L (pinion left)

6FB1103?0AT10?4MB0

• SIDOOR M3 R (pinion right)

6FB1103?0AT11?4MB0

• SIDOOR M4 geared motors (max. door weight 400 kg, degree of protection IP40)

• SIDOOR M4 L (pinion left)

6FB1103?0AT10?3MC0

• SIDOOR M4 R (pinion right)

6FB1103?0AT11?3MC0

• SIDOOR M5 geared motors (max. door weight 600 kg, degree of protection IP54)

• SIDOOR M5 L (pinion left)

6FB1103?0AT10?3MD0

• SIDOOR M5 R (pinion right)

6FB1103?0AT11?3MD0

Accessories for the overall system
See also overview diagram → "For elevators"

"Accessories"

• Rubber-metal anti-vibration mounts 
  for low-noise operation of the door drive system

• for the SIDOOR MDG180 and SIDOOR M3 geared motors

6FB1104?0AT02?0AD0

• for SIDOOR MDG400, SIDOOR M4 and SIDOOR M5 geared motors

6FB1104?0AT01?0AD0

• Mounting bracket

• for mounting the SIDOOR rubber-metal anti-vibration mount with a mounted geared motor

6FB1104?0AT01?0AS0

• with tensioning device for mounting the deflector unit and setting the toothed belt to the required tension

6FB1104?0AT02?0AS0

• DIN rail holder for mounting controllers on the DIN rail TH 35 according to IEC 60715

6FB1144?0AT00?3AS0

• Door clutch holder
  for attaching both ends of the toothed belt, and for connecting the respective door panel to the toothed belt

• for toothed belt width of 12 mm

6FB1104?0AT01?0CP0

• for toothed belt width of 14 mm

6FB1104?0AT02?0CP0

• Deflector unit
  for deflecting the STS toothed belt in the same height and depth, aligned with motor drive pinion

6FB1104?0AT03?0AS0