濟南天鑫數控設備有限公司

一看用料.優質的鋁合金門窗設備所用的鋁型材,厚度、強度和氧化膜等,應符合有關的國家標準規定,壁厚應在1.2毫米以上,抗拉強度達到每平方米毫米157牛頓,屈服強度要達到每平方毫米108牛頓,氧化膜厚度應達到10微米.如果達不到以上標準,就是劣質鋁合金門窗設備,不可使用.

A look at the material. Aluminum Alloy used aluminum doors and windows equipment quality, thickness, strength and oxide film, shall conform to the relevant provisions of the national standard, the wall thickness should be more than 1.2 mm, the tensile strength of 157 mm per square metre of Newton, yield strength to reach 108 per square millimeter of Newton, the thickness of the oxide film should reach 10 micron. If not up to the above standard, it is inferior Aluminum Alloy doors and windows equipment, can not be used.

二看加工.優質的鋁合金門窗設備,加工精細,安裝講究,密封性能好,開關自如.劣質的鋁合金門窗設備,盲目選用鋁型材系列和規格,加工粗制濫造,以鋸切割代替銑加工,不按要求進行安裝,密封性能差,開關不自如,不僅漏風漏雨和出現玻璃炸裂現象,而且遇到強風和外力,容易將推拉部分或玻璃刮落或碰落,毀物傷人.

Two see. Aluminum Alloy doors and windows processing equipment, high precision machining, installation stress, good sealing performance, switching freely. Aluminum Alloy inferior door window equipment, choose aluminous profile series and specifications, processing by saw cutting instead of crudely made, milling, no installation required, poor sealing performance, the switch does not freely, not only air leaks and glass burst phenomenon, and encountered strong winds and force, easy to push and pull part or glass fall or drop, and destroy wounding.

三看價格.在一般情況下,優質鋁合金門窗設備因生產成本高,價格比劣質鋁合金門窗設備要高30%左右.有些有壁厚僅0.6-0.8毫米鋁型材制作的鋁合金門窗設備,抗拉強度和屈服強度大大低于國家有關標準規定,使用很不安全.此外,目前加工鋁合金門窗設備的個體戶較多,他們不懂得鋁合金門窗設備的結構特點及其性能.

Three see price. In general, the quality Aluminum Alloy doors and windows equipment because of its high production cost, the price ratio of Aluminum Alloy inferior door window equipment is 30% higher. Some have only 0.6-0.8 mm aluminum production equipment Aluminum Alloy window wall thickness, tensile strength and yield strength are significantly lower than the national standard, it is not safe to use. In addition, the current processing equipment more Aluminum Alloy doors and windows of the self-employed, they do not understand the structure characteristics and performance Aluminum Alloy doors and windows equipment.

濟南天鑫數控設備有限公司

    濟南天鑫數控設備有限公司
 濟南天鑫數控設備有限公司( 15964542270)是一家專業從事鋁塑門窗設備,斷橋鋁門窗設備，塑鋼門窗設備，鋁幕墻設備，中空玻璃設備的研發，生產，銷售和技術服務的現代化高新技術企業。
公司鋁門窗加工機器可完成鋁型材的切割，組角，鉆孔，沖孔，彎圓等工序，塑鋼門窗設備可 完成型材切割，焊接，銑削，清理等工序。十大系列，四十余個品種設備，均得到了廣大新老客戶的一致好評。
濟南天鑫數控設備有限公司
聯系人：朱經理 
電話：0531-85977876 
傳真：0531-85977876 
手機：15964542270 
網址：http://www.tianxincnc.com/
地址：濟南市槐蔭區工業園5-26-1號

中國魯商云網：http://www.lushangyun.com/
濟南微信營銷，濟南微營銷，濟南微信推廣www.weidaoshang.com 
諾商商道系統，-專業互聯網應用服務提供商：www.chinanovo.net
諾商商道系統，-專業互聯網應用服務提供商：www.cn-un.net
諾商基于多年的優化經驗和品牌基礎推出的諾商商道系統，諾商信息您身邊的互聯網專家！