商鋪名稱：東莞市繼勝金屬鋼鐵有限公司
聯系人：唐珞珞（小姐）
聯系手機：
固定電話：
企業郵箱：yh470816601@163.com
聯系地址：東莞市長安鎮沙頭社區振安路
郵編：530861
聯系我時，請說是在線纜網上看到的，謝謝！
| Grade : | X55CrMo14耐腐蝕鋼、棒材 | ||||||
| Number: | 1.4110 | ||||||
| Classification: | Martensitic stainless steel | ||||||
| Density: | 7.7 g/cm 3 | ||||||
| Standard: | |||||||
| EN 10088-2:2005不銹鋼。通用耐腐蝕鋼片/板和帶材交貨技術條件 | |||||||
| EN 10088-3:2005不銹鋼。一般用途耐腐蝕鋼的半成品、棒材、線材、型材和光亮產品的交貨技術條件 | |||||||
| EN 10088-1:2005不銹鋼。不銹鋼清單 | |||||||
| Equivalent grades: | No information | ||||||
| Chemical composition % of steel X55CrMo14 (1.4110): EN 10088-2-2005 | |||||||
| Tighter carbon ranges may be agreed at the time of enquery and order | |||||||
| Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended. | |||||||
| Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. | |||||||
| C | Si | Mn | P | S | Cr | Mo | V |
| 0.48 - 0.6 | max 1 | max 1 | max 0.04 | max 0.015 | 13 - 15 | 0.5 - 0.8 | max 0.15 |
| Mechanical properties of steel X55CrMo14 (1.4110) | |||||||
| Rm - Tensile strength (MPa) (+A) | 850-950 | ||||||
| A - Min. elongation at fracture (%) (+A) | 12 | ||||||
| Brinell hardness (HB): (+A) | 280 | ||||||
