杜邦鐵氟龍(Teflon)涂層加工
杜邦鐵氟龍(Teflon)涂層加工
產品價格:¥3(人民幣)
  • 規格:Teflon
  • 發貨地:上海
  • 品牌:
  • 最小起訂量:1件
  • 免費會員
    會員級別:試用會員
    認證類型:企業認證
    企業證件:通過認證

    商鋪名稱:比爾安達(上海)潤滑材料有限公司

    聯系人:郁水峰(先生)

    聯系手機:

    固定電話:

    企業郵箱:smallwatersh@sina.com

    聯系地址:上海市寶山區長建路198號1號廠房

    郵編:200949

    聯系我時,請說是在線纜網上看到的,謝謝!

    商品詳情
      杜邦鐵氟龍420-703涂層的詳細描述:
      Fact Sheet
      Description
      Teflon® 420-703 solvent-based primer offers superior
      intercoat adhesion with PFA and FEP powders.
      This primer is not recommended as a one coat.
      Refer to Table 1 for physical property data.
      FDA Status
      Teflon® 420-703 complies with FDA regulations in
      21 CFR governing components of coatings for direct
      food contact when applied according to Fact Sheet
      instructions. Topcoats must also comply for the
      system to be FDA conforming.
      Table 1
      Teflon ® Primer for Powder Coatings
      Typical Properties
      420-703
      Color Black
      Weight Solids, % 30.6
      Volume Solids, % 17.9
      Density, lb/gal 9.5
      kg/L 1.14
      Coverage, m2/L* 7.1
      ft2/gal* 287
      Viscosity, cP 800–1600
      Maximum Use Temperature **
      Note: These figures are averages and may vary.
      * Theoretical coverage at 25 μm (1 mil) assuming 100% spray
      efficiency.
      ** Dependent upon Topcoat. Refer to Fact Sheet on Topcoat.
      Substrates
      Teflon® 420-703 primer can be used on carbon steel,
      stainless steel, and aluminum substrates. Substrates
      must be free of contamination and thoroughly
      cleaned. To obtain maximum adhesion, gritblasting
      is recommended to a profile of 4–8 μm
      (0.2–0.3 mil). The primer should be applied
      immediately after blasting on carbon steel to
      minimize flash rusting. Refer to the Fact Sheet
      on Application.
      Topcoats
      Teflon® 420-703 is the recommended primer for
      532-5nnn, 532-7nnn, 532-8nnn, 856-Line and
      857-210.
      Application
      1. Bring material to room temperature.
      2. Mix thoroughly and filter the material through a
      100-mesh stainless steel screen (0.146 mm
      openings).
      3. The primer is supplied ready to spray. If
      further reduction is required TN-8595, a 50:50
      mixture of NMP:MIBK, may be used up to
      1–2% by volume.
      Use conventional industrial spray equipment.
      4. Apply at dry film thickness of 10–15 μm
      (0.4–0.6 mil). On carbon steel, cover blast
      profile for best results.
      Bake
      As primer for powder topcoats:
      1. Spray powder directly onto wet primer, or
      force dry then apply powder topcoats.
      2. Bake as recommended by the Fact Sheet on
      Topcoat. Note: Optimum adhesion with PFA
      powder requires an initial bake of 400°C
      (750°F) metal temperature.
      As primer for liquid topcoats:
      1. Force dry at 220°C (430°F) for 10 min.
      Teflon® Primer for Powder Coatings
      420-703
      DuPont™ Teflon®
      Industrial Coatings
      The DuPont Oval Logo, The miracles of science®, and Teflon® are
      trademarks or registered trademarks of E.I. du Pont de Nemours and
      Company.
      Use of DuPont trademarks is subject to License Agreement and qualification
    在線詢盤/留言
  • 0571-87774297  
    主站蜘蛛池模板: 很黄很刺激很爽的免费视频| 人人爽人人爽人人爽| 国产成人三级经典中文| 国产精品9999久久久久仙踪林| 国产精品大bbwbbwbbw| 成人精品一区二区三区中文字幕 | 在线天堂bt种子| 日本边添边摸边做边爱边视频| 最近中文字幕mv图| 日本韩国中文字幕| 成年丰满熟妇午夜免费视频| 怡红院色视频在线| 大胸美女放网站| 国产精品天干天干| 国产成人亚洲综合无码精品| 国产一级特黄a大片免费| 午夜爱爱免费视频| 亚洲精品色午夜无码专区日韩| 俄罗斯精品bbw| 国产清纯91天堂在线观看| 国产无套护士丝袜在线观看| 国产剧情中文字幕| 午夜爽爽试看5分钟| 亚洲老妈激情一区二区三区| 亚洲国产三级在线观看| 久艹视频在线免费观看| 中文字幕精品无码亚洲字| 一本大道香蕉在线影院| 99久久99久久精品免费观看| 日本wwwxxxxx| 老司机成人精品视频lsj| 激情啪啪精品一区二区| 最近免费中文字幕视频高清在线看 | 翁虹一级毛片手机观看| 波多野结衣系列无限发射| 樱桃视频影院在线观看| 成年美女黄网站色大片图片| 国产高潮视频在线观看| 国产精品区免费视频| 国产乱子伦精品视频| 亚洲精品第一国产综合精品|